spec no: dsaa6572 rev no: v.9 date: may/31/2007 page: 1 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000062 notes: 1. all dimensions are in millimeters (inches), tolerance is 0 .25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. package dimensions & internal circuit diagram 30.48mm(1.2 inch) 16 segment single digit alphanumeric numeric display features z 1.2 inch character height . z low current operation. z high contrast and light output. z easy mounting on p.c. boards or sockets. z categorized for luminous intensity. z mechanically rugged. z standard:gray face, white segment. z rohs compliant. part number: PSA12-11SRWA super bright red description the super bright red source color devices are made with gallium aluminum arsenide red light emitting diode.
spec no: dsaa6572 rev no: v.9 date: may/31/2007 page: 2 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000062 selection guide part no. dice lens type iv (ucd) [1] @ 10ma min. typ. PSA12-11SRWA super bright red (gaaias) white diffused 8000 26000 common anode, rt. hand decimal description electrical / optical characteristics at t a =25c absolute maximum ratings at t a =25c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. parameter super bright red units power dissipation c,d,g,h,k,m,n,s,r,t 150 75 mw a,b,e,f,p,u and dp dc forward current c,d,g,h,k,m,n,s,r,t 30 30 ma a,b,e,f,p,u and dp peak forward current [1] c,d,g,h,k,m,n,s,r,t 155 155 ma a,b,e,f,p,u and dp reverse voltage c,d,g,h,k,m,n,s,r,t v a,b,e,f,p,u and dp operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3-5 seconds 10 5 symbol parameter device typ. max. units test conditions peak peak wavelength super bright red 660 nm i f =20ma d[1] dominant wavelength super bright red 640 nm i f =20ma ? 1/2 spectral line half-width super bright red 20 nm i f =20ma c capacitance super bright red 45 pf v f =0v;f=1mhz v f [2] forward voltage c,d,g,h,k,m,n,s,r,t super bright red 3.7 5.0 v i f =20ma a,b,e,f,p,u and dp 1.85 2.5 i r reverse current c,d,g,h,k,m,n,s,r,t super bright red 10 ua a,b,e,f,p,u and dp 10 v r = 10v v r = 5v ua note: 1. luminous intensity/ luminous flux: +/-15%. notes: 1. wavelength: +/-1nm. 2. forward voltage: +/-0.1v.
spec no: dsaa6572 rev no: v.9 date: may/31/2007 page: 3 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000062 PSA12-11SRWA super bright red note:the curves are on the segment a,b,e,f,p,u and dp.
spec no: dsaa6572 rev no: v.9 date: may/31/2007 page: 4 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000062 note:the curves are on the segment c,d,g,h,k,m,n,s,r and t.
spec no: dsaa6572 rev no: v.9 date: may/31/2007 page: 5 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000062 packing & label specifications PSA12-11SRWA
|
